27.04.2023, 17:15
Hello Ion,
I have looked to the service manual. Before you start to adjust screw 21, you have to adjust the distance between the outer diameter of the pinch roller and the outer diameter of the capstan axle. Loosen 2 screws 20 and adjust for a distance of 44mm in Stop/Halt mode, then tighten srews 20 and measure again. The adjustment is correct if you can measure a clearance of 0.3mm or greater at point a with Play/Start button pressed.
Regards, Tobias
I have looked to the service manual. Before you start to adjust screw 21, you have to adjust the distance between the outer diameter of the pinch roller and the outer diameter of the capstan axle. Loosen 2 screws 20 and adjust for a distance of 44mm in Stop/Halt mode, then tighten srews 20 and measure again. The adjustment is correct if you can measure a clearance of 0.3mm or greater at point a with Play/Start button pressed.
Regards, Tobias
Strom kann erst dann fliessen, wenn Spannung anliegt.
