Möchte einmal Rückmeldung zu meinem oben beschriebenen kleinen Problem geben, obwohl ich nicht mit einer Lösung aufwarten kann.
Es ging um den geringen Spannungsverlust des Inputsignals, dessen Ursache ich ohne Messen und Kenntnisse darüber nach wie vor nicht finden kann.
1. Habe das Audioteil ausgebaut und wirklich alle Steckverbinder gereinigt wie von Hans-Volker beschrieben. Sie waren aber ohnehin ohne Makel.
Generell mal alle Steckverbindungen der Platinen gezogen. Ohne Erfolg.
2. Alle verbauten Kondensatoren verglichen auf Werte und Polung. Nichts auffällig.
Seltsam ist, dass in meinem SM C3 und C20 einmal mit 1uF und ein anderes Mal mit 10uF angegeben sind. Ich habe mich nach Plan 2 orientiert und 1uF eingesetzt gehabt. Vorher war 1uF drin. Das hatte aber wohl nichts mit meiner Problematik zu tun.
3. Testweise C34, C35 getauscht. Natürlich ohne Verbesserung.
Übrigens trat das Problem genauso auf AUX 2 auf. Betroffen war immer der linke Kanal.
4. Alle Cinchbuchsen nachgelötet.
Nun kam ich nicht weiter, denn da fehlen einfach die Kenntnisse. Da es sich um meine Aufnahmemaschine handelt und ich durch drei Monate ohne Internet sowieso schon an Entzug litt, habe ich folgendes gemacht:
Noch auf Reserve liegendes Audioteil revidiert, VUs incl. Platine verpflanzt, meine gepflegten Fader eingebaut.
Endlich war das Problem weg.
Wieder die Einmessung geprüft und nun ist sie endlich wieder ohne Mangel am Start.
Keine Heldentat.
Aber eine andere Lösung fand ich nicht.
Ich habe jetzt einfach mal den Vorteil genutzt, ein Ersatzteil zu haben, was ich mir anstelle immer neuer Maschinen früher gekauft hatte.
Wahrscheinlich erlebe ich auch nochmal den Tag, an dem ich messen lerne und dann finde ich ja vielleicht den Fehler.
Nun steht sie hier und klingt klasse, arbeitet fehlerfrei und deswegen möchte ich sie auch nicht mehr auseinander pflücken.
Danke nochmal für Eure Tipps!
Es ging um den geringen Spannungsverlust des Inputsignals, dessen Ursache ich ohne Messen und Kenntnisse darüber nach wie vor nicht finden kann.
1. Habe das Audioteil ausgebaut und wirklich alle Steckverbinder gereinigt wie von Hans-Volker beschrieben. Sie waren aber ohnehin ohne Makel.
Generell mal alle Steckverbindungen der Platinen gezogen. Ohne Erfolg.
2. Alle verbauten Kondensatoren verglichen auf Werte und Polung. Nichts auffällig.
Seltsam ist, dass in meinem SM C3 und C20 einmal mit 1uF und ein anderes Mal mit 10uF angegeben sind. Ich habe mich nach Plan 2 orientiert und 1uF eingesetzt gehabt. Vorher war 1uF drin. Das hatte aber wohl nichts mit meiner Problematik zu tun.
3. Testweise C34, C35 getauscht. Natürlich ohne Verbesserung.
Übrigens trat das Problem genauso auf AUX 2 auf. Betroffen war immer der linke Kanal.
4. Alle Cinchbuchsen nachgelötet.
Nun kam ich nicht weiter, denn da fehlen einfach die Kenntnisse. Da es sich um meine Aufnahmemaschine handelt und ich durch drei Monate ohne Internet sowieso schon an Entzug litt, habe ich folgendes gemacht:
Noch auf Reserve liegendes Audioteil revidiert, VUs incl. Platine verpflanzt, meine gepflegten Fader eingebaut.
Endlich war das Problem weg.
Wieder die Einmessung geprüft und nun ist sie endlich wieder ohne Mangel am Start.
Keine Heldentat.
Aber eine andere Lösung fand ich nicht.
Ich habe jetzt einfach mal den Vorteil genutzt, ein Ersatzteil zu haben, was ich mir anstelle immer neuer Maschinen früher gekauft hatte.
Wahrscheinlich erlebe ich auch nochmal den Tag, an dem ich messen lerne und dann finde ich ja vielleicht den Fehler.
Nun steht sie hier und klingt klasse, arbeitet fehlerfrei und deswegen möchte ich sie auch nicht mehr auseinander pflücken.
Danke nochmal für Eure Tipps!