20.04.2009, 15:06
Hello,
I have three UHER Report (the third isn't here):
Uher 4400 Report Stereo - it has an A124 adaptor, Uher 4000 Report IC - it has the A124 A1-adaptor, Uher Report L - unknown adaptor
Now I took the 4400 Report Stereo and measurured the output voltage. If the machine ist powered on, I have here 6,05 V. When I start recording it drops down to 4,6 V! :oah: But this machine is not tested and had no repair. My Z124 connector also has to be repaired!! That's a fact. 4,6 V isn't normal.
Then I measured the Z124-A1 adaptor in the same machine. Power on: 6,00 V, then I started recording: 5,8 V. It seems normally. Can't use a DIN cable, but I've measurded directly the output contacts of the Z124 or Z124-A1.
Greetings Jens
I have three UHER Report (the third isn't here):
Uher 4400 Report Stereo - it has an A124 adaptor, Uher 4000 Report IC - it has the A124 A1-adaptor, Uher Report L - unknown adaptor
Now I took the 4400 Report Stereo and measurured the output voltage. If the machine ist powered on, I have here 6,05 V. When I start recording it drops down to 4,6 V! :oah: But this machine is not tested and had no repair. My Z124 connector also has to be repaired!! That's a fact. 4,6 V isn't normal.
Then I measured the Z124-A1 adaptor in the same machine. Power on: 6,00 V, then I started recording: 5,8 V. It seems normally. Can't use a DIN cable, but I've measurded directly the output contacts of the Z124 or Z124-A1.
Greetings Jens